Dynojet 248x: Installation Guide - Manual (Page 29)

Document #98219101 3 - 11
Catwalk Installation
The following steps will explain how to put the
catwalks on the dyno. The three pictures above
identify the components referred to in these steps.
Step 1
Place the catwalk (A) on the dynamometer above
the brakes, so the lip of the catwalk lays on the
dynamometer frame and butts up against the deck
plate on the dynamometer. Using the 3/8" x 1"
slotted truss head machine screws, secure it to the
top of the dynamometer frame.