Dynojet 248x: Installation Guide - Manual (Page 6)

1 - 2 Document #98219101
Four Post Lift/Dyno Placement
Four Post Lift Placement
Before you install the Four Post Lift, you need
to think about the position of the lift relative to
the garage and the dynamometer.
• For AMCO lifts you may place the
dynamometer on either end of the lift but it
is recommended that you place the dyno
on the end of the lift with the hydraulics.
• For BENWIL lifts you place the dyno on the
opposite end of the hydraulic controls.
• Keep in mind the placement of your
computer, monitor and DynoWare EX+
hardware.