Achronix Speedster22i HD1000 Development Kit User Guide - Manual (Page 10)

10 UG034, July 1, 2014
Chapter 1
– ACX-KIT-HD1000-100G
Overview
In this chapter, you will learn the following about the ACX-KIT-HD1000-100G kit:
ACX-KIT-HD1000-100G Kit Contents
ACX-KIT-HD1000-100G Kit Uses
ACX-BRD-HD1000-100G Development Board Features
Achronix CAD Environment (ACE) Software
ACX-KIT-HD1000-100G Kit Contents
The Achronix ACX-KIT-HD1000-100G kit contents are as follows:
Components Sub-Components
ACX-BRD-HD1000-100G Development Board Described below
BitPorter Programming Pod Power Supply with power cord
USB cable
7ft Ethernet cable
14-pin JTAG ribbon cable
Power Supply
ACX-KIT-HD1000-100G Kit Quickstart Guide
Achronix CAD Environment (ACE) License
ACX-KIT-HD1000-100G Kit Uses
The Achronix ACX-KIT-HD1000-100G kit allows you to evaluate the AC22IHD1000-F53C3
FPGA. The ACX-KIT-HD1000-100G kit includes the ACX-BRD-HD1000-100G development
board, which is optimized for networking and communications applications. Ports, controls,
memories, and interfaces on the board allow you to evaluate and debug the programmable
functionality and the hardened IP in the AC22IHD1000-F53C3 device.
The kit comes with instructions to easily set up the development environment, and configure
the HD1000 device with your designs.
You can use the board as a stand-alone target or as a PCI Express card plugged into a PCIe
Gen3 x8 slot.