Roadi RDT51 - Manual (Page 79)

OWNER S MANUAL
,
OBD2 Car Scanner
75
CHECK
Diagnostic Menu
========================-=9/11
On-Board Mon. Test
Component Test
Vehicle Info.
Modules Present
Unit of Measure
Vehicle Info.
========================-=2/3
Vehicle Info.
=============================
Vehicle Info.
=============================
2). An advisory message comes up to remind you. Wait a few seconds
or press any key to continue.
Turn key on
with engine off !
Press any key to con.
3). Wait a few seconds while the scan tool reads vehicle information.
Reading info…
- Please Wait -
Vehicle ID Number
Calibration ID
Cal. Verif. Number
If the vehicle does not support this mode, a message shows on the
display warning that the mode is not supported.
4). From Vehicle Info. menu, use
UP/DOWN scroll button to select an
available item to view and press
ENTER button.