Roadi RDT51 - Manual (Page 168)

OWNER S MANUAL
,
OBD2 Car Scanner
164
CHECK
Test $01…
=======================
On-Board Mon. Test …
=======================
On-Board Mon …
=======================
The selected mode is
not supported
Press any key to con.
For CAN-equi pped vehicles, test selections can be as below:
4).
Use UP/DOWN scroll button to select the desired monitor from On-
Board Mon. Test menu and press ENTER button.
5). View test data on screen.
ID: 00
MOD : $11
MEAS: 0
MAX : 0
MIN : --------
STS : OK
For CAN-equi pped vehicles, test results displayed can be as below:
6). Press ESC button to return to the previous menus.
O2 Mon. B1S1
O2 Mon. B1S2
Catalyst Mon. B1
EGR Mon. Bank1
15.8 Component Test
The Component Test function allows initiating a leak test for the vehicle's
EVAP system. The scan tool itself does not perform the leak test, but
commands the vehicle's on-board computer to start the test. Different
vehicle manufacturers mig ht have different criteria and methods for
stopping the test once it has been started. Before starting the Component
Test, refer to the vehicle service manual for instructions to stop the test.