Roadi RDT51 - Manual (Page 147)

OWNER S MANUAL
,
OBD2 Car Scanner
143
CHECK
If the manufacturer for your vehicle is not listed, use
UP/DOWN scroll
button to select
Other and press ENTER button.
15.2 Erasing Codes
CAUTION: Erasing the Diagnostic Trouble Codes may allow the scan
tool to delete not only the codes from the vehicle's on-board computer,
but also
Freeze Frame data and manufacturer specific enhanced data.
Further, the I/M Readiness Monitor Status for all vehicle monitors is reset to
Not Ready or Not Complete status. Do not erase the codes before the
system has been checked completely by a technician.
This function is performed with key on engine off (KOEO). Do
not start the engine.
1). Use
UP/DOWN scroll buttons to select Erase Codes from
Diagnostics Menu and press ENTER button.
Diagnostic Menu
====================2/11
Read Codes
Erase Codes
Live Data
View Freeze Frame
I/M Readiness
O2 Monitor Test
2). A warning message comes up asking for your confirmation.
Erase Codes
=======================
Erase trouble codes!
Are you sure?
YES NO
If you do not want to proceed with erasing codes, press
ESC button
or use LEFT/RIGHT scroll button to select NO to exit. A message of
"Command Cancelled!"” show ups. Wait a few seconds or press any key
to return to
Diagnostic Menu.
3)Press ENTER button to confirm.
If the codes are cleared successfully, an "“Erase Done!”"confirmation
message shows on the display.