Roadi RDT51 - Manual (Page 110)

OWNER S MANUAL
,
OBD2 Car Scanner
106
CHECK
If
DTC Trigger is selected, following screen shows:
DTC Trigger
=======================
Recording..... 5/60
===================-=-=
Record Data
=======================
Waiting for DTC to
trigger recording…
Press [ESC] to exit
6) Wait for DTC to trigger recording or press ENTER to start recording.
Drive till a DTC is detected when DTC Trigger is selected. If no
DTCs are detected, press ESC to exit recording.
6
DTC_CNT 6
FUELSYS1 OL
FUELSYS2 N/A
LOAD_PCT(%)
0.0
ETC( C ) -40
SHRTFT1(%)
0.0
The number "“x/x...”" to the upper rig ht corner of the screen indicates
the maximum frames that can be recorded and the number of recorded
frames.
7) The scan tool keeps recording PID data until user presses ESC button,
selected memory location is full,or it completes recording. A message
prompting to playback data shows on the screen.
Record Done!
Playback data?
YES
NO