Roadi RDT51 - Manual (Page 62)

OWNER S MANUAL
,
OBD2 Car Scanner
58
CHECK
Manual Trigger…
=============================
DTC Trigger…
=============================
Recording… 5/60
==========================-=-
Ready to record!
Press [ENTER] to
start recording…
Press [ESC] to exit
If DTC Trigger is selected, following screen shows:
Waiting for DTC to
trigger recording…
Press [ESC] to exit
6). Wait for DTC to trigger recording or press
ENTER to startrecording.
Drive till a DTC is detected when DTC Trigger is selected. If no DTCs
are detected, press
ESC to exit recording.
6
DTC_CNT 6
FUELSYS1 OL
FUELSYS2 N/A
LOAD_PCT(%)
0.0
ETC( C ) -40
The number "x/x..." to the upper rig ht corner of the screen indicates
the maximum frames that can be recorded and the number of recorded
frames.
7). The scan tool keeps recording PID data until user presses
ESC button,
selected memory location is full,or it completes recording. A message
prompting to playback data shows on the screen.