Roadi RDT51 - Manual (Page 152)

OWNER S MANUAL
,
OBD2 Car Scanner
148
CHECK
Live Data
===================-2/3
Recording Data
The Record Data function allows recording vehicle modules
Parameter
Identification (PID) data to help diagnose intermittent vehicle problems.
A recording includes 5 frames of live data before trigger event and
several frames after trigger event.
There are two trigger modes used to record data:
A.
Manual Trigger - allows user to press ENTER button to start
recording.
B.
DTC Trigger - automatically records PID data when a fault that
causes a DTC to set is detected by vehicle.
CAUTION: Do not try to drive and operate the scan tool at the same time!
Always have another person operate the scan tool while driving.
1) To record live data, use
UP/DOWN scroll button to select Record
Data from Live Data menu and press ENTER button.
Recording Complete Data Set
2). To record complete set of live data, use
UP/DOWN scroll button to
select Complete Data Set from Record Data menu and press
ENTER
button.
View Data
Record Data
Playback Data
Record Data
====================1/3
3). Use
UP/DOWN scroll button to select a trigger mode and press
ENTER button.
Complete Data Set
Custom Data Set
Unit of Measure
Pick Trigger Mode
====================1/2
Manual Trigger
DTC Trigger