Roadi RDT51 - Manual (Page 109)

OWNER S MANUAL
,
OBD2 Car Scanner
105
CHECK
Select Memory
====================1/3
Select Memory
=======================
Manual Trigger
=======================
4) Use UP/DOWN scroll button to select a memory location and
press ENTER button.
The asterisk (*) icon on the screen indicates that there is a previous
recording in the memory location.
If you select a location marked with an asterisk (*) icon, a message
prompting to overwrite old recording displays.
A previous recording
exists! Do you want
to overwrite it?
YES
NO
If you wish to proceed with overwriting the old recording, press
ENTER
button; if you do not wish to overwrite it, use
LEFT/RIGHT button to
select NO or press ESC button to pick another memory location.
5) Observe on-screen instructions.
If
Manual Trigger is selected, following screen shows:
Ready to record!
Press [ENTER] to
start recording…
Press [ESC] to exit
Location #1 *
Location #2
Location #3