Roadi RDT51 - Manual (Page 154)

OWNER S MANUAL
,
OBD2 Car Scanner
150
CHECK
Manual Trigger
=======================
If you wish to proceed with overwriting the old recording, press
ENTER
button; if you do not wish to overwrite it, use
LEFT/RIGHT button to
select
NO or press ESC button to pick another memory location.
5). Observe on-screen instructions.
If
Manual Trigger is selected, following screen shows:
Ready to record!
Press [ENTER] to
start recording…
Press [ESC] to exit
If
DTC Trigger is selected, following screen shows:
DTC Trigger
=======================
Recording..... 5/60
===================-=-=
Waiting for DTC to
trigger recording…
Press [ESC] to exit
6). Wait for DTC to trigger recording or press ENTER to start recording.
Drive till a DTC is detected when DTC Trigger is selected. If no
DTCs are detected, press ESC to exit recording.
6
DTC_CNT 6
FUELSYS1 OL
FUELSYS2 N/A
LOAD_PCT(%)
0.0
ETC( C ) -40
SHRTFT1(%)
0.0
The number "x/x..." to the upper rig ht corner of the screen indicates
the maximum frames that can be recorded and the number of recorded
frames.