Roadi RDT51 - Manual (Page 46)

OWNER S MANUAL
,
OBD2 Car Scanner
42
CHECK
If you press and hold the power switch, the key name does not show
on the screen, but resets the scanner when powered by vehicle battery, or
turns off the scanner when powered by cell battery. If it does not restart
the scanner or power off the scanner, the key is not working properly.
3). Double press
ESC to return to previous menu.
6.9 Tool Information
The Tool Information function allows viewing of some important inform-
ation such as serial number and software version number of the scanner.
1). From
Main Menu, use UP/DOWN scroll button to select Tool Inform-
ation and press
ENTER button.
Main Menu
============================
Tool Information
=============================
2). View tool information on screen.
Serial No. : MS083462
Burn Date : 11/12/07
S/W Ver : V1.00
H/W Ver : V1.01
LIB Ver
: V1.00
6.10 Battery Replacement
The scan tool requires a 9V cell battery to operate when disconnected
from vehicle power.
1). Locate the battery cover on the back of the scan tool.
2). Remove the battery cover screw and slide the battery cover off.
Diagnostics
DTC Lookup
Review Data
System Setup
Tool Information