Owner s manual, Obd ii diagnostics, Obd2 car scanner – Roadi RDT51 User Manual
Page 143
OWNER S MANUAL
,
OBD2 Car Scanner
139
CHECK
=======================
Engine Coolant Temperature
Sensor 1 Circuit Hig h
$09 1/6
P0118
Generic
If there is no data stored for selected item, a "
Not Supported or
Stored No Data!” message shows on the screen.
Review Data
====================1/1
If no data from previously tested vehicle is recorded, only
Module
Present data containing module ID and protocol type can be reviewed.
Modules Present
15. OBD II Diagnostics
When more than one vehicle control module is detected by the
scan tool, you will be prompted to select the module where
the data may be retrieved. The most often to be selected are
the Powertrain Control Module [PCM] and Transmission Control
Module [TCM].
CAUTION: Don't connect or disconnect any test equipment with ignition
on or engine running.
1. Turn the ignition off.
2. Locate the vehicle's 16-pin Data Link Connector (DLC).
3. Plug into the scan tool cable connector to the vehicle's DLC.
4. Turn the ignition on. Engine can be off or running.
5. Press
ENTER button to enter Main Menu. Use UP/DOWN scroll
button to select
Diagnostics from the menu.
Main Menu
====================1/6
Diagnostics
DTC Lookup
Review Data
Print Data
System Setup
Tool Information