Roadi RDT51 - Manual (Page 163)

OWNER S MANUAL
,
OBD2 Car Scanner
159
CHECK
Current Readiness…
=======================
2). Wait a few seconds while the scan tool validates the PID MAP.
Reading PID…
- Please Wait -
Current Readiness:
Views the status of 11 sensors/moinots at present I/M readiness
1). Choose Current Readiness and press Enter button.
3). If the vehicle supports both types of tests, then both types will be
shown on the screen for selection.
Currrent Readiness…
====================1/2
Since DTCs Cleared…
=======================
4). Use UP/DOWN scroll button, as necessary, to view the status of the
MIL lig ht ("ON" or "OFF") and the following monitors:
Misfire monitor -- Misfire monitor
Fuel System Mon -- Fuel System Monitor
Comp. Component -- Comprehensive Components Monitor
EGR -- EGR System Monitor
Oxygen Sens Mon -- O2 Sensors Monitor
Catalyst Mon -- Catalyst Monitor
EVAP System Mon -- Evaporative System Monitor
Oxygen Sens htr --O2 Sensor Heater Monitor
Sec Air System -- Secondary Air Monitor
Htd Catalyst -- Heated Catalyst Monitor
A/C Refrig Mon -- A/C system Monitor
MIL Status OFF
Misfire Monitor
OK
Fuel System Mon OK
Comp. Component OK
Catalyst Mon INC
Htd Catalyst N/A
Since DTCs Cleared
This Drive Cycle