Roadi RDT51 - Manual (Page 53)

OWNER S MANUAL
,
OBD2 Car Scanner
49
CHECK
Trouble Codes
============================-
=============================
If there are no Diagnostic Trouble Codes present, the display indicates
"No (pending) codes are stored in the module!" Wait a few seconds
or press any key to return to Diagnostic Menu.
3). View DTCs and their definitions on screen.
Engine Coolant Temperature
Sensor 1 Circuit Hig h
$09 1/5
P0118
Generic
The control module number, sequence of the DTCs, total number of
codes detected and type of codes (Generic or Manufacturer specific) will
be observed on the upper rig ht hand corner of the display.
4). If more than one DTC is found, use
UP/DOWN scroll button, as
necessary, until all the codes have been shown up.
If retrieved DTCs contain any manufacturer specific or enhanced
codes, a
"Manufacturer specific codes are found! Press any key
to select vehicle make!" message comes up prompting you to select
vehicle manufacturer to view DTC definitions. Use
UP/DOWN scroll
button to select manufacturer and then press ENTER button to confirm.
Stored Codes
Pending Codes