Owner s manual, Obd2 car scanner – Roadi RDT51 User Manual

Page 32

OWNER S MANUAL

OBD2 Car Scanner

CHECK

Diagnostic Menu

I/M Readiness

========================4/6

===========================

========================1/2

Reading PID…

- Please Wait -

2) Wait a few seconds while the scan tool validates the PID MAP.

3) If the vehicle supports both types of tests, then both types will be

shown on the screen for selection.

4) Use

UP/DOWN scroll button, as necessary, to view the status of the

MIL lig ht (“ON” or “OFF) and the following monitors:

Misfire monitor -- Misfire monitor

Fuel System Mon -- Fuel System Monitor

Comp. Component -- Comprehensive Components Monitor

EGR -- EGR System Monitor

Read Codes
Erase Codes
View Freeze Frame

I/M Readiness

Vehicle Info.
Unit of Measure

Since DTCs Cleared

This Drive Cycle

completed its diagnostic testing.

" N/A”" -- The monitor is not supported on that vehicle.

1) Use

UP/DOWN scroll button to select I/M Readiness from

Diagnostic Menu and press ENTER button.

This manual is related to the following products: