Owner s manual, Obd2 car scanner – Roadi RDT51 User Manual
Page 157
OWNER S MANUAL
,
OBD2 Car Scanner
153
CHECK
Pick Trigger Mode
====================1/2
Manual Trigger
=======================
DTC Trigger
=======================
Select Memory
====================1/3
If data from previously tested vehicle is not erased, data from current test
will be stored in temporary cache. Following screen shows when
Manual
Trigger is selected:
Ready to record!
Press [ENTER] to
start recording
…
Press [ESC] to exit
Or following screen shows when
DTC Trigger is selected:
Waiting for DTC to
trigger recording…
Press [ESC] to exit
12). Use
UP/DOWN scroll button to select a memory location and
press
ENTER button.
Manual Trigger
DTC Trigger
Location #1
*
Location #2
Location #3
The asterisk (*) icon on the screen indicates that there is a previous
recording in the memory location.
If you select a location marked with an asterisk (*) icon, a message
prompting to overwrite old recording is displayed.