Roadi RDT51 - Manual (Page 78)

OWNER S MANUAL
,
OBD2 Car Scanner
74
CHECK
3). From Component Test menu, use
UP/DOWN scroll button to select
the test to be initiated.
Component Test
========================-=1/1
4). If the test has been initiated by the vehicle, a confirmation message will
be displayed on the screen.
Evap Leak Test
Working
============================
Component Test
============================
Command Sent!
Press any key to con.
Some vehicles do not allow scan tools to control vehicle systems or
components. If the vehicle under test does not support the EVAP Leak
Test, an advisory message is displayed on the screen.
The selected mode is
not supported
Press any key to con.
5). Wait a few seconds or press any key to return to Diagnostic Menu.
8.9 Viewing Vehicle Information
The Vehicle Info. function enables retrieval of Vehicle Identification No.
(VIN), Calibration ID(s), Calibration Verification Nos. (CVNs) and In-use
Performance Tracking on 2000 and newer vehicles that support Mode 9..
1). Use
UP/DOWN scroll button to select Vehicle Info. from the Diagnostic
Menu and press
ENTER button.