Roadi RDT51 - Manual (Page 156)

OWNER S MANUAL
,
OBD2 Car Scanner
152
CHECK
10). Use
RIGHT button select/deselect data parameters. Selected
parameters are marked with solid squares. Press
ENTER button to
confirm.
Custom Data Set
=======================
Deselect All
=======================
You are allowed to pick up a maximum of 18 PIDs. If the selected PIDs
exceed 18, a "
The selected data list is full!" message displays on the
screen.
If you wish to deselect all marked items, press
LEFT button.
A message comes up to ask for your confirmation.
Deselect all
selected PIDs?
YES NO
If you decide to deselect these items, press
ENTER; if you decide not
to, press
ESC button, or use UP/DOWN button to select NO and press
ENTER to continue PID selections.
Custom Data Set
===================-=-5
11). Use
UP/DOWN scroll button to select a trigger mode and press
ENTER button.
DTC_CNT #01
FUELSYS1
FUELSYS2 #02
LOAD_PCT(%) #03
ETC( C )
SHRTFT1(%)
DTC_CNT #01
FUELSYS1
FUELSYS2 #02
LOAD_PCT(%) #03
ETC( C )
SHRTFT1(%)