Owner s manual, Obd2 car scanner – Roadi RDT51 User Manual
Page 119
OWNER S MANUAL
,
OBD2 Car Scanner
115
CHECK
tests:
A. Since DTCs Cleared - indicates status of the monitors since the DTCs
are erased.
B. This Drive Cycle - indicates status of monitors since the beginning of
the current drive cycle.
An I/M Readiness Status result of "“NO”" does not necessarily indicate
that the vehicle being tested will fail the state I/M inspection. For some
states, one or more such monitors may be allowed to be "“Not Ready"”
to pass the emissions inspection.
"OK"” -- Indicates that a particular monitor being checked has completed
its diagnostic testing.
"INC"”-- Indicates that a particular monitor being checked has not
completed its diagnostic testing.
"N/A" -- The monitor is not supported on that vehicle.
1) Use
UP/DOWN scroll button to select I/M Readiness from
Diagnostic Menu and press ENTER button.
Diagnostic Menu…
====================5/11
I/M Readiness…
=======================
2) Wait a few seconds while the scan tool validates the PID MAP.
Reading PID…
- Please Wait -
Read Codes
Erase Codes
Live Data
View Freeze Frame
I/M Readiness
O2 Monitor Test