Owner s manual, Obd2 car scanner – Roadi RDT51 User Manual
Page 27
OWNER S MANUAL
,
OBD2 Car Scanner
23
CHECK
monitor codes”. They indicate problems that the control module has
detected during the current or last driving cycle but are not considered
serious yet. Pending Codes will not turn on the malfunction indicator lamp
(MIL). If the fault does not occur within a certain number of warm-up
cycles, the code clears from memory.
1) Use
UP/DOWN scroll button to select Read Codes from
Diagnostic Menu and press ENTER button.
Diagnostic Menu
Trouble Codes
========================1/6
========================1/2
==========================
Engine Coolant Temperature
Sensor 1 Circuit Hig h
2) Use
UP/DOWN scroll button to select Stored Codes or Pending
Codes from the Trouble Codes menu and press ENTER button.
If there are no Diagnostic Trouble Codes present, the display indicates
"No (pending) codes are stored in the module!”" Wait a few seconds
or press any key to return to
Diagnostic Menu.
3) View DTCs and their definitions on screen.
$09
1/5
P0118
Generic
Read Codes
Erase Codes
View Freeze Frame
I/M Readiness
Vehicle Info.
Stored Codes
Pending Codes