Roadi RDT51 - Manual (Page 170)

OWNER S MANUAL
,
OBD2 Car Scanner
166
CHECK
Diagnostic Menu…
===================-9/11
Vehicle Info.
=======================
Component Test…
=======================
Some vehicles do not allow scan tools to control vehicle systems or
components. If the vehicle under test does not support the
EVAP Leak
Test, an advisory message is displayed on the screen.
The selected mode is
not supported
Press any key to con.
15.9 Viewing Vehicle Information
The Vehicle Info. function enables retrieval of Vehicle Identification
No.(VIN), Calibration ID(s),Calibration Verification Nos. (CVNs) and In-use
Performance Tracking on 2000 and newer vehicles that support Mode 9.
1). Use
UP/DOWN scroll button to select Vehicle Info. from the
Diagnostic Menu and press ENTER button.
2). An advisory message comes up to remind you. Wait a few seconds
or press any key to continue.
Turn key on
with engine off !
Press any key to con.
3). Wait a few seconds while the scan tool reads vehicle information.
On-Board Mon. Test
Component Test
Vehicle Info.
Modules Present
Unit of Measure
5). Wait a few seconds or press any key to return to Diagnostic Menu.