Roadi RDT51 - Manual (Page 67)

OWNER S MANUAL
,
OBD2 Car Scanner
63
CHECK
DTC Trigger
=============================
Recording… 5/60
==========================_=6
If DTC Trigger is selected, following screen shows:
Waiting for DTC to
trigger recording…
Press [ESC] to exit
14). Wait for DTC to trigger recording or press
ENTER to start recording.
15). The scan tool keep recording PID data until user presses ESC button,
the selected memory location is full, or it completes recording. A message
prompting to playback data shows on the screen.
…………
DTC_CNT 6
FUELSYS1 OL
FUELSYS2 N/A
LOAD_PCT(%)
0.0
ETC( C) -40
SHRTFT1(%) 0.0
Record Data
=============================
Record Done!
Playback data?
YES NO
If you wish to playback recorded data, press
ENTER button; if you do
not wish to playback, press
ECS button, or use LEFT/RIGHT button to
select
NO and press ENTER button to return to Record Data menu.