Roadi RDT51 - Manual (Page 118)

OWNER S MANUAL
,
OBD2 Car Scanner
114
CHECK
3) If retrieved information covers more than one screen, then a down
arrow will appear. Use DOWN scroll button, as necessary, until all the data
have been shown up.
View Freeze Frame…
=====================2
FUELSYS1…
=====================
If there is no freeze frame data available, an advisory message" No freeze
frame data stored!”" shows on the display.
4) If you want to view full name of a PID, use
UP/DOWN scroll button to
select the PID.
Fuel System 1 Status
Press any key to con.
5) Wait a few seconds or press any button to return to previous
screen.
11.5 Retrieving I/M Readiness Status
I/M Readiness function is used to check the operations of the Emission
System on OBD2 compliant vehicles. It is an excellent function to use
prior to having a vehicle inspected for compliance to a state emissions
program.
Some latest vehicle models may support two types of I/M Readiness
DTC_CNT 1630
FUELSYS1 OL
FUELSYS2 N/A
LOAD_PCT(%) 0.0
ETC( C ) -40
SHRTFT1(%) 0.0