Dell POWEREDGE C6105 - Manual (Page 90)

90 | Installing System Components
Recommended Configuration
Memory - 4G, 1333, 2Rx4X72, 8, 240
HDD - 600G, SAS6, 15K, 3.5, SGT
Full Configuration
This includes full quantity of processors (95W), memory (4G, 1333, 2R)
and HDD (600G, SAS6, 15K, 3.5).
Removing a Power Supply
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
CAUTION: The System requires at least one power supply to operate normally.
1 Recommended to turn off the system, including any attached
peripherals, and disconnect the system from the electrical outlet.
2 Disconnect the power cable from the power source and the power
supply.
3 Press the release lever and using the handle, slide the power supply out
of the system. See Figure 3-5.
NOTE: Removing the power supply may require considerable force.