Dell POWEREDGE C6105 - Manual (Page 66)

66 | Using the System Setup Program
Option Description
Save Changes and Exit Exit system setup after saving the changes. F10 key
can be used for this operation.
Discard Changes and Exit Exit system setup without saving any changes. ESC
key can be used for this operation.
Discard Changes Discards changes done so far to any of the setup
questions. F7 key can be used for this operation.
Load Optimal Defaults Load optimal default values for all the setup questions.
F9 key can be used for this operation.
Load 2nd Defaults Load second default values for all the setup questions.
This item only selectable if 2nd Defaults was saved
before.
The first time to save 2nd Default in setup, the item
will not be displayed immediately, only available from
the next boot.
Save 2nd Defaults Save all setup questions‘ current value as second
default.
Command Line Interfaces for Setup options
The options of SETUP menu allow the user to control by system
configuration utility (syscfg), the utility includes in Dell OpenManage
Deployment Toolkit (DTK).
Users can use the utility as following:
 To change the SETUP option by D4 token:
./syscfg –t=D4_token_id
(Example: ./syscfg -t=0x002D to enable NIC1)