Dell POWEREDGE C6105 - Manual (Page 62)

62 | Using the System Setup Program
Remote Access Configuration
Select Remote Access Configuration to view the following submenu:
Option Description
Remote Access
(Enabled default) Enables or disables remote access support.
Serial Port Number
(COM2 default) Selects serial port for console redirection.
Serial Port Mode
(115200 8,n,1 default) Selects serial port settings.
Flow Control
(None default) Selects flow control for console redirection.
Redirection After BIOS
POST
(Always default) Disabled: turn offs the redirection after POST.
Always: Redirection is always active. (Some Oss may
not work if set to Always.)