beautypg.com

System memory, Supported dimm configuration – Dell POWEREDGE C6105 User Manual

Page 132

background image

132

|

Installing System Components


4 Install the four screws to secure the Mellanox card assembly to the

system-board assembly. See Figure 3-28.

5 Place the expansion-card bracket into the system-board assembly.
6 Replace the four screws that secure the expansion-card bracket.
7 Reconnect all the cables to the Mellanox card.
8 Replace the system-board assembly. See "Installing a System-Board

Assembly" on page 93.

System Memory

Each system board has twelve unbuffered or registered DDR3-DIMM slots
for the installation of up to twelve DDR3-800/1066/1333/1600* memory
chips to support processor 0 and processor 1. See "System Board
Connectors"
on page 198 for the location of the memory modules.

NOTE: System memory working frequency is up to 1333MT/s only.

Supported DIMM Configuration

For the sequence of the twelve DIMM sockets, see Figure 3-30. When you
insert the single rank/dual rank DIMM(s), always start with DIMMA2. See
Table 3-2 for possible memory configurations.