Dell POWEREDGE C6105 - Manual (Page 40)

40 | Using the System Setup Program
To do this, see ―Remote Access Configuration‖ on page 62. Note that the
last four options need to sync with the host and client.
4 Enter LAN Configuration screen and verify the following settings:
 BMC LAN Port Configuration: Shared-NIC
 DHCP Enabled: Disabled or Enabled (Enabled if DHCP server
support)
 IP Address: 192.168.001.003
 Subnet Mask: 255.255.255.000
 Gateway Address: 000.000.000.000
To do this, see ―LAN Configuration‖ on page 61. Note that the host and
client need to have the same network section.