Removing the lsi 9265-8i raid battery – Dell POWEREDGE C6105 User Manual
Page 118
118
|
Installing System Components
3 Reconnect the cable connecting to the LSI 9265-8i card. Make sure the
cable is routed properly as shown in Figure 3-18.
4 Install the system-board assembly. See ―Installing a System-Board
Removing the LSI 9265-8i RAID Battery
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
NOTE: The information in this section applies only to systems with the optional
RAID controller card.
1 Remove the system-board assembly. See ―Removing a System-Board
2 Disconnect the cable connecting to the LSI 9265-8i card.
3 Remove the LSI 9265-8i RAID battery assembly. See Figure 3-19.
4 Remove the screws that secure the LSI 9265-8i RAID battery to the
LSI 9265-8i RAID battery carrier. See ―Removing the LSI 9265-8i
RAID Battery‖ on page 115.
5 Lift the LSI 9265-8i RAID battery away from the LSI 9265-8i RAID
battery carrier. See Figure 3-20.