Dell POWEREDGE C6105 - Manual (Page 128)

128 | Installing System Components
4 Install the four screws to secure the NIC daughter card assembly to the
system-board assembly. See Figure 3-25.
5 Place the expansion-card bracket into the system-board assembly.
6 Replace the four screws that secure the expansion-card bracket.
7 Reconnect all the cables to the NIC daughter card.
8 Replace the system-board assembly. See "Installing a System-Board
Assembly" on page 93.
Removing the Mellanox Card
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
NOTE: The Mellanox card comes with a different MLB tray, which is dedicated to
the use of the card.
1 Remove the system-board assembly. See "Removing a System-Board
Assembly" on page 92.
2 Disconnect all the cables from the Mellanox daughter card.
3 Remove the four screws that secure the expansion-card bracket. See
Figure 3-27.
4 Lift the expansion-card bracket out of the system-board assembly. See
Figure 3-24.