Dell POWEREDGE C6105 - Manual (Page 29)

About Your System | 29
Error Code Error Message Response Error Cause Recovery
Method
disabled!!! device connected.
8104 Warning! Port 60h/64h
emulation is not supported
by this USB Host
Controller!!! Warning Host controller not
supported 60h/64h
emulation.
Board repair
8105 Warning! EHCI controller
disabled. It requires 64bit
data support in the BIOS. Pause Check whether this
host controller
needs 64bit data
structure or not. Board repair
8400 Warning!! Insufficient
memory! Remote access is
disabled. Warning Not enough
memory for serial
redirection.
Board repair
8601 Error: BMC Not
Responding Pause BMC chip does not
find. Board repair
8701 Insufficient Runtime space
for MPS data!!
System may operate in PIC
or Non-MPS mode. Pause Failed to copy the
MPTable to F000
or E000 shadow
RAM. Board repair
8702 No enough APIC ID in
range 0-0Fh can be assigned
to IO APICs.
(Re-assigning CPUs' local
APIC ID may solve this
issue)
MPS Table is not built!
System may operate in PIC
or Non-MPS mode. Pause Check APIC failed. Board repair