Dell POWEREDGE C6105 User Manual
Page 161

Installing System Components | 161
5 Replace the screws that secure the middle-plane holder to the chassis.
6 Place the mid-plane holder support into the chassis. See Figure 3-44.
7 Replace the screws that secure the mid-plane holder support to the
chassis. See Figure 3-44.
8 Place the upper middle plane on the middle-plane holder. See Figure
9 Replace the screws that secure the middle plane to the middle-plane
holder. See Figure 3-43.
10 Connect all the cables to the upper middle plane. See Figure 5-9.
You must route these cables properly through the tabs on the chassis to
prevent them from being pinched or crimped.
11 Place the fan bracket into the chassis. Figure 3-42.
12 Replace the screws that secure the fan bracket to the chassis. Figure 3-
13 Replace the cooling fans. See "Installing a Cooling Fan" on page 146.
14 Replace the system-board assemblies. See "Installing a System-Board
15 Close the system, see "Closing the System" on page 143.
16 Reconnect the system to its electrical outlet and turn on the system,
including any attached peripherals.