Dell POWEREDGE C6105 - Manual (Page 108)

108 | Installing System Components
LSI 9260-8i RAID Battery (Optional)
Removing the LSI 9260-8i RAID Battery
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
NOTE: The information in this section applies only to systems with the optional
RAID controller card.
1 Remove the system-board assembly. See ―Removing a System-Board
Assembly‖ on page 92.
2 Disconnect the cable connecting to the LSI 9260-8i RAID battery.
3 Press the LSI 9260-8i RAID battery latch and lift the LSI 9260-8i RAID
battery to release it from the LSI 9260-8i RAID battery carrier. See
Figure 3-14.
4 Slide and lift the LSI 9260-8i RAID battery away from the LSI 9260-8i
RAID battery carrier. See Figure 3-14.