Dell POWEREDGE C6105 - Manual (Page 142)

142 | Installing System Components
Figure 3-34. Removing and Installing the System Board
1 screw (8) 2 system board
3 system-board assembly
Installing a System Board
1 Unpack the new system board.
2 Holding the system board by the edges, slide the system board into the
system-board assembly.
3 Replace the eight screws to secure the system board to the system-
board assembly.
4 Transfer the processors to the new system board. See "Removing a
Processor" on page 96 and "Installing a Processor" on page 97.
5 Remove the memory modules and transfer them to the same locations
on the new board. See "Removing the Memory Modules" on page 133
and "Installing the Memory Modules" on page 134.
6 Connect the hard drive and power cables to the system board.