Dell POWEREDGE C6105 - Manual (Page 76)

76 | Using the System Setup Program
Token Setup option Description
4900 USB PORT
10(Internal) Enable USB port 10.
48BF Memory
Remap(3GB-4GB) Disable remap system memory space 3GB-4GB.
48C0 Memory
Remap(3GB-4GB) Enable remap system memory space 3GB-4GB.
48C1 OnChip SATA Type Onboard SATA controller(s) is set to MS_AHCI
mode.
48C2 DRAM Timing
Config Auto to configure DRAM Timing.
48C3 DRAM Timing
Config Manual to configure DRAM Timing.
48C4 Memory Clock
Speed Configure DRAM clock in 800MHz.
48C5 Memory Clock
Speed Configure DRAM clock in 1066MHz.
48C6 Memory Clock
Speed Configure DRAM clock in 1333MHz.
5001 PCI-E Slot ASPM Controls the level of ASPM supported on the PCI
Express Link of port 2. All entry disabled.
5002 PCI-E Slot ASPM Controls the level of ASPM supported on the given
PCI Express Link of port 2. L0s entry enabled.
5003 PCI-E Slot ASPM Controls the level of ASPM supported on the given
PCI Express Link of port 2. L1 entry enabled.
5004 PCI-E Slot ASPM Controls the level of ASPM supported on the given
PCI Express Link of port 2. L0s and L1 entry
enabled.
5005 PCI-E Slot ASPM Controls the level of ASPM supported on the given
PCI Express Link of port 2. L0s entry downstream
enabled.
5006 PCI-E Slot ASPM Controls the level of ASPM supported on the given
PCI Express Link of port 2. L0s entry downstream
and L1 enabled.