Dell POWEREDGE C6105 - Manual (Page 70)

70 | Using the System Setup Program
Token Setup option Description
401D Redirection After
BIOS POST The BIOS console redirection, if enabled, operates
during the BIOS boot only and is disabled prior to
OS boot hand-off. See also tokens BFh, C0h, D7h,
401Ah and 401Bh.
4022 Force PXE first Whenever the BIOS boots up the system, the first
PXE-capable device is inserted as the first device in
the boot sequence. Enabling this feature causes the
BIOS operation to occur on the next and all
subsequent boots and causes a change in the system's
defined boot sequence (unlike tokens 93h and 94h).
The BIOS chooses the first PXE-capable device as
the system's onboard network controller, if present
and enabled, or the first bootable network device
found in the system's standard PCI search order —
whichever comes first.
4023 Force PXE first The PXE boot override is disabled and the system
boot sequence is in effect.
4033 Serial Port Mode Console Redirection baud rate is set to 115,200 bits
per second.
4034 Serial Port Mode Console Redirection baud rate is be set to 57,600 bits
per second.
4035 Serial Port Mode Console Redirection baud rate is set to 19,200 bits
per second.
4036 Serial Port Mode Console Redirection baud rate is set to 9,600 bits per
second.
4037 Serial Port Mode Console Redirection baud rate is set to 3,8400 bits
per second.
4800 Quick Boot Do not allows BIOS to skip certain tests while
booting.
4801 Quick Boot Allows BIOS to skip certain tests while booting. This
decreases the time needed to boot the system.
4804 SR-IOV Disable Single Root I/O Virtualization.
4805 SR-IOV Enable Single Root I/O Virtualization.
480E BMC LAN Port Specifies the current mode of operation for the BMC