Show qos rcv-queue multicast – Dell POWEREDGE M1000E User Manual

Page 281

Dell Converged Enhanced Ethernet Command Reference

265

53-1002115-01

show qos rcv-queue multicast

Displays the runtime state retrieved from the dataplane reflecting any multicast packet expansion
packet drops resulting from a queue crossing the maximum queue depth.

Synopsis

show qos rcv-queue multicast {tengigabitethernet slot/port | all}

Operands

interface

Use this keyword to specify any of the following interfaces:

extengigabitethernet

Specifies a valid external 10 Gbps Ethernet interface.

slot

Specifies a valid slot number.

port

Specifies a valid port number.

intengigabitethernet

Specifies a valid internal 10 Gbps Ethernet interface.

slot

Specifies a valid slot number.

port

Specifies a valid port number.

all

Reports QoS multicast packet expansion receive queueing statistics for all
ASICs within the system.

Defaults

There are no default configurations for this command.

Command

Modes

EXEC mode

Description

Use this command to display the runtime state information retrieved from the interface reflecting
any multicast packet expansion packet drops resulting from a queue crossing the maximum queue
depth.

Usage

Guidelines

For a stand-alone switch, all ASICs are considered as slot number zero (0).

Examples

To display the queueing information:

switch#show qos rcv-queue multicast intengigabitethernet 0/2

Dropped Counts

Linecard/Portset TC 0 TC 1 TC 2 TC 3

-----------------------------------------------------------------------------

0/0 0 0 0 0