Dell POWEREDGE M1000E - Manual (Page 252)

236 Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
show rmon
15
show rmon
Displays the current RMON status on the switch.
Synopsis show rmon [alarms [number] [brief] | events [number] [brief] | logs [event_number] | statistics
[number] [brief]]
Operands alarms Specifies to display the RMON alarm table.
number Specifies the alarm index identification number. The range of valid values is
1-65535.
brief Specifies to display a brief summary of the output.
events Specifies to display the RMON events table.
number Specifies the event index identification number. The range of valid values is
1-65535.
brief Specifies to display a brief summary of the output.
logs Specifies to display the RMON log table.
event_number Specifies the event index identification number. The range of valid values is
1-65535.
statistics Specifies to display the statistics identification number.
number Specifies the statistics identification number. The range of valid values is
1-65535.
brief Specifies a brief summary of the output.
Defaults There are no default configurations for this command.
Command
Modes
EXEC mode
Description Use this command to display the status of the current RMON on the switch.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To display the RMON statistics:
switch#show rmon statistics
rmon collection index 4
Interface index is Id: 67108864 , Name : InTenGigabitEthernet 0/0
Receive Statistics:
218903 packets, 14015626 bytes, 0 packs dropped
Multicasts: 218884, Broadcasts: 18
Under-size : 0, Jabbers: 0, CRC: 0
Fragments: 0, Collisions: 0
64 byte pkts: 218722, 65-127 byte pkts: 174
128-255 byte pkts: 0, 256-511 byte pkts: 6
512-1023 byte pkts: 0, 1024-1518 byte pkts: 0
Over 1518-byte pkts(Oversize - Jumbo): 0