Dell POWEREDGE M1000E - Manual (Page 152)

136 Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
show mac-address-table
8
Command
Modes
EXEC mode
Description Use this command to display a specific static or dynamic MAC address entry or all entries for a
specific interface, a specific VLAN, a specific linecard, or for all interfaces and all VLANs.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To display a specific MAC address in the table:
switch#show mac-address-table address 0011.2222.3333
VlanId Mac-address Type State Ports
100 0011.2222.3333 Static Inactive Te 0/1
Total MAC addresses : 1
To display the aging time for a specific MAC address table:
switch#show mac-address-table aging-time
MAC Aging-time : 300 seconds
To display a dynamic MAC address table:
switch#show mac-address-table dynamic
VlanId Mac-address Type State Ports
100 0011.2222.5555 Dynamic Inactive Te 0/1
100 0011.2222.6666 Dynamic Inactive Te 0/1
Total MAC addresses : 2
See Also show mac address-table dynamic, show mac address-table static, show mac address-table
linecard, show mac address-table count