Show running-config – Dell POWEREDGE M1000E User Manual
Page 53
Dell Converged Enhanced Ethernet Command Reference
37
53-1002115-01
show running-config
2
show running-config
Displays the contents of the configuration file currently running on the system.
Synopsis
show running-config [access-list |cee-map | interface | lldp | rmon | spanning-tree]
Operands
access-list
Displays the running configuration of the access-list.
cee-map
Displays the QoS Converged Enhanced Ethernet (CEE) maps configuration.
interface
Displays the interface configuration.
lldp
Displays the LLDP configuration.
rmon
Displays the Remote Monitoring Protocol (RMON) configuration.
spanning-tree
Displays the switch configuration.
Defaults
There are no default configurations for this command.
Command
Modes
Privileged EXEC mode
Description
Use this command to display the contents of the configuration file currently running on the system.
The show running-config command displays only the commands that were successfully executed.
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To display the content of the current configuration file:
switch#show running-config
!
no protocol spanning-tree
!
interface Vlan 1
!
interface InTenGigabitEthernet 0/0
shutdown
!
interface InTenGigabitEthernet 0/1
shutdown
!
interface InTenGigabitEthernet 0/2
shutdown
!
interface InTenGigabitEthernet 0/3
shutdown
!
interface InTenGigabitEthernet 0/4
shutdown
!
See Also
show startup-config