Fcoe-vlan – Dell POWEREDGE M1000E User Manual

Page 155

Dell Converged Enhanced Ethernet Command Reference

139

53-1002115-01

fcoe-vlan

Configures an FCoE VLAN to the FCoE map and deletes the previous FCoE VLAN.

Synopsis

fcoe-vlan vlan_id

Operands

vlan_id

Specifies the VLAN interface to configure. The range of valid values is from 2
to 3583.

Defaults

There are no default configurations for this command.

Command

Modes

Feature configuration mode

Description

Use this command to configure an FCoE VLAN to the FCoE map. Using this command deletes the
previous FCoE VLAN.

Usage

Guidelines

There are no usage guidelines for this command.

Example

You must first enter FCoE map mode, then configure the VLAN.

switch(config)#fcoe-map default

switch(conf-fcoe-map)#fcoe-vlan 5