Vlan classifier activate group – Dell POWEREDGE M1000E User Manual

Page 72

Dell Converged Enhanced Ethernet Command Reference

53-1002115-01

vlan classifier activate group

Activates a VLAN classifier group.

Synopsis

vlan classifier activate group number vlan vlan_id

no vlan classifier activate group

Operands

number

Specifies which VLAN classifier group to activate. The range of valid values is
1-16.

vlan vlan_id

Specifies which VLAN interface to activate. The range of valid values is
1-3583.

Defaults

There are no default configurations for this command.

Command

Modes

Interface configuration mode

Description

Use this command to activate a VLAN classifier group for a specified VLAN. Use the no vlan
classifier activate group command to remove the specified group.

Usage

Guidelines

A VLAN classifier cannot be added to the FCoE VLAN.

Examples

To activate VLAN classifier group 1 for VLAN 5:

switch-cmsh(conf-if-te-0/10)#vlan classifier activate group 1 vlan 5