Rmon collection history – Dell POWEREDGE M1000E User Manual
Page 249

Dell Converged Enhanced Ethernet Command Reference
233
53-1002115-01
rmon collection history
15
rmon collection history
Collects the periodic statistical samples of Ethernet group statistics on an interface for later
retrieval.
Synopsis
rmon collection history number [buckets bucket_number | interval seconds | owner name]
no rmon collection history number
Operands
number
Specifies the RMON collection control index value. The range of valid values
is 1-65535.
buckets bucket_number
Specifies the maximum number of buckets for the RMON collection history.
The range of valid values is 1 to 65535.
interval seconds
Specifies the alarm sample interval in seconds. The range of valid values is
1-2147483648.
owner name
Specifies the identity of the owner. The maximum number of characters is 32.
Defaults
The collection of RMON history is not enabled.
Command
Modes
Interface configuration mode
Description
Use this command to collect Ethernet group statistics on an interface. Use the no rmon collection
history command to disable the history.
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To collect RMON statistics for the owner admin on 10 Gbps Ethernet interface 0/1:
switch(config)#interface intengigabitethernet 0/1
switch(conf-if-te-0/1)#rmon collection history 5
See Also
show rmon history