Dell POWEREDGE M1000E - Manual (Page 175)

Dell Converged Enhanced Ethernet Command Reference 159
53-1002115-01
clear spanning-tree counter
11
clear spanning-tree counter
Clears all spanning-tree counters on the interface.
Synopsis clear spanning-tree counter [interface| port-channel number | {in | ex}tengigabitethernet
slot/port]
Operands interface Specifies the interface on which to clear the spanning-tree counters.
port-channel number
Specifies the port-channel number. The range of valid values is 1-63.
tengigabitethernet
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults There are no default configurations for this command.
Command
Modes
Privileged EXEC mode
Description Use this command to clear the spanning-tree counters on the interface.
Usage
Guidelines
If the interface operand is not specified, spanning-tree counters are cleared for all interfaces.
Examples To clear spanning-tree counters for all interfaces:
switch#clear spanning-tree counter
To clear spanning-tree counters for a 10 Gbps Ethernet interface:
switch#clear spanning-tree counter interface intengigabitethernet 0/1
To clear spanning-tree counters for port-channel 23:
switch#clear spanning-tree counter interface port-channel 23
See Also show spanning-tree