Dell POWEREDGE M1000E - Manual (Page 122)

106 Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
lldp dcbx-version
6
lldp dcbx-version
Specifies which version of the Data Center Bridging Exchange (DCBX) protocol to use.
Synopsis lldp dcbx-version [auto |cee | pre-cee]
Operands auto Specifies to auto adjust the DCBX protocol version to accommodate the
difference when a switch interacts with different vendors using a different
version of the DCBX protocol.
cee Specifies to use the Converged Enhanced Ethernet (CEE) DCBX version.
pre-cee Specifies to use the standard DCBX version, which is the version released
prior to the CEE DCBX release.
Defaults The default is auto.
Command
Modes
Interface configuration mode
Description Use this command to specify which version of the DCBX protocol to use.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To specify which DCBX version to use:
switch(conf-if-te-0/1)#lldp dcbx-version cee
See Also none