Dot1x timeout re-authperiod – Dell POWEREDGE M1000E User Manual

Page 292

276

Dell Converged Enhanced Ethernet Command Reference

53-1002115-01

dot1x timeout re-authperiod

Sets the number of seconds between reauthorization attempts.

Synopsis

dot1x timeout re-authperiod seconds

Operands

seconds

Specifies the seconds between reauthorization attempts. The range of valid
values is 1-4294967295.

Defaults

The default time is 3600 seconds.

Command

Modes

Interface configuration mode

Description

Use this command to set the number of seconds between reauthorization attempts.

Usage

Guidelines

There are no usage guidelines for this command.

Examples

To set 25 seconds as the amount of time between reauthorization attempts:

switch(config)#interface extengigabitethernet 0/16

switch(conf-if-te-0/16)#dot1x timeout re-authperiod 25