Dell POWEREDGE M1000E - Manual (Page 134)

118 Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
show lldp statistics
6
show lldp statistics
Displays the LLDP statistics on all interfaces or a specified interface.
Synopsis show lldp statistics [interface {in | ex}tengigabitethernet slot/port]
Operands interface Use this keyword to specify the 10 Gbps Ethernet interface using the following
operand followed by the slot or port number.
interface Use this keyword to specify any of the following interfaces:
extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
intengigabitethernet
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults There are no default configurations for this command.
Command
Modes
EXEC mode
Description Use this command to display LLDP statistics on all interfaces or a specified interface.
Usage
Guidelines
If you do not specify the interface tengigabitethernet operand, this command displays the LLDP
statistics for all interfaces.
Examples To display LLDP statistics on the specified interface:
switch#show lldp statistics interface intengigabitethernet 0/8
LLDP Interface statistics for Te 0/8
Frames transmitted: 555
Frames Aged out: 0
Frames Discarded: 0
Frames with Error: 0
Frames Recieved: 554
TLVs discarded: 0
TLVs unrecognized: 0
See Also none