Dot1x reauthmax – Dell POWEREDGE M1000E User Manual
Page 291

Dell Converged Enhanced Ethernet Command Reference
275
53-1002115-01
dot1x reauthMax
17
dot1x reauthMax
Sets the maximum number of times that a port attempts to reauthenticate.
Synopsis
dot1x reauthMax number
no dot1x reauthMax
Operands
number
Specifies the maximum number of reauthentication attempts before the port
goes to the unauthorized state. The range of valid values is 1-10.
Defaults
The default number of times that a port attempts authentication is two.
Command
Modes
Interface configuration mode
Description
Use this command to set the maximum number of times that a port attempts to reauthenticate
before a port changes to the unauthorized state. Use the no dot1x reauthMax command to return
to the default setting.
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To set the maximum number of reauthentication attempts to 5:
switch(config)#interface extengigabitethernet 0/16
switch(conf-if-te-0/16))#dot1x reauthMax 5
To set the reauthentication maximum to the default value:
switch(config)#interface extengigabitethernet 0/16
switch(conf-if-te-0/16)#no dot1x reauthMax
See Also
none