Dell POWEREDGE M1000E - Manual (Page 131)

Dell Converged Enhanced Ethernet Command Reference 115
53-1002115-01
show lldp interface
6
show lldp interface
Displays the LLDP status on the specified interface.
Synopsis show lldp interface [{in | ex}tengigabitethernet slot/port]
Operands extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
intengigabitethernet
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults There are no default configurations for this command.
Command
Modes
EXEC mode
Description Use this command to display the LLDP status on the specified interface.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To display all the LLDP interface information for a selected interface:
switch#show lldp interface intengigabitethernet 0/0
LLDP information for Te 0/0
State: Enabled
Mode: Receive/Transmit
Advertise Transmitted: 30 seconds
Hold time for advertise: 120 seconds
Re-init Delay Timer: 2 seconds
Tx Delay Timer: 1 seconds
DCBX Version : CEE
Auto-Sense : Yes
Transmit TLVs: Chassis ID Port ID
TTL IEEE DCBX
DCBX FCoE App DCBX FCoE Logical Link
Link Prim Brocade Link
DCBX FCoE Priority Bits: 0x8
See Also none